How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and enjoyable hatchback with unique engine design. It's not the most quiet, however it's still a fun car to drive.
The key fob battery in your nissan juke needs to be replaced every two years or at the latest, or if it's low. You can do it yourself, but you'll need tools.
Dead Coin Battery
If your Nissan Juke key fob isn't working the first thing you should be sure of is the battery inside. It could be dead and must be replaced. This is a quick fix that takes only a few minutes. It's as easy as flipping the fob upside down and removing the tiny latch/release located on the back. Replace the battery you have previously installed by making sure it's facing down on the fob. Line up the two halves with care.
The fob needs to be cleaned if it has been exposed to water before you can install the new battery. It is possible to clean the fob by using isopropyl electronic cleaner, and paper towels. Then, allow it to dry completely prior to installing the battery.
To start the car the key fob needs to also be connected to the car. This can be accomplished according to the instructions in your owner's manual or with an OBDII scan. The most likely reason the key fob stopped working is because it was not linked to the car. A defective chip inside the fob could cause it to cease to function however this is extremely rare. A new receiver module may be required in this instance. If this is the case, it will need to be replaced by a certified technician.
Water Damage
Key fobs are powered by a battery, and these batteries need to be changed every two years or every first sign of your car not responding when you hit the "start" button. The keys' rubber seals protect them from water, however submerging your key fob in the pool or ocean can damage the electronic chip. If this is the case, you will have to purchase a new key from Nissan or an automotive locksmith.
If the key's fob has a working chip It's likely that the computer has simply lost its connection to it, which could occur for a variety of reasons. It can be fixed by restarting the car. If the "Key ID error" message is still visible then you should contact Nissan for assistance.
The three most frequent reasons for this are dead batteries on key fobs, a non-programmed key, and a damaged or defective key fob. The first two are easy to fix, and the third one is more difficult to fix in the moment, but it is generally fixable with a bit of patience. Compare Nissan Key Replacement costs near you using WhoCanFixMyCar and book your repair online. You can read about the experiences of local Nissan dealerships, Nissan mechanics, and garages in a matter of minutes.
Faulty Chip
The key fob on your Nissan Juke has a special chip that sends an indication to the car every time you turn it. The Key Lab might stop working when the chip is damaged. If this happens, the problem can only be solved by replacing the key. There are a variety of reasons your Nissan Juke's key may be damaged, including water damage, a dead coin battery or a malfunctioning receiver module.
If your key fob stops working after a soak in the wash or bath, you should check the chip for water damage. Make sure that the metal clips that hold it in place are secure and that the chip isn't exposed to any water. If you see any signs of water damage, you can try removing the battery and wiping down the electronic component using isopropyl alcohol, or electronic cleaner.
If the chip is not working You'll need to contact your local locksmith or dealer. In order to find a replacement, they will need the year, model and year of your vehicle. It is also necessary record your VIN (Vehicle ID Number) so that the dealer, or locksmith can know exactly which key you have. This will allow them to find the correct key code, and also ensure that they cut the right one.
Faulty Receiver Module
The key fob sends radio frequency signals to your car that performs a number of functions. It can unlock your trunk while you rush to get groceries or start your car by pressing the button on the fob. It can also open your windows and turn on the horn in the event that you lock the keys in your car.
If the key fob ceases working, it could be an issue with the receiver module inside the vehicle. The receiver modules are tuned so that they can receive specific frequencies that correspond to signals sent by Nissan key fobs. A defective receiver module could stop your car from responding to the signal received by the key fob of Nissan.
Whatever way your Nissan key fob is damaged, it's always good to have a spare in case the key becomes broken or lost. A locksmith or dealership can program a spare key to work with your Nissan. This will allow you to avoid the hassle of losing your keys or locking them inside your car.
If your Nissan Juke key fob has been exposed to clean water from the tap or rain The issue could be solved by cleaning it using isopropyl ethanol or electronic cleaner. However, if the chip is damaged it will be necessary to purchase a replacement key fob that can be programmed to your car by a locksmith or a dealer.